Everything about Abrasive Machining totally explained
Abrasive Machining is a manufacturing process where material is removed from a workpiece using a multitude of small
abrasive particles. Common examples include grinding, honing, and polishing. Abrasive processes are usually expensive, but capable of tighter tolerances and better surface finish than other manufacturing processes.
Mechanics of Abrasive Machining
Abrasive machining works by forcing the abrasive particles, or grains, into the surface of the workpiece so that each particle cuts away a small bit of material. Abrasive machining is similar to conventional machining, such as milling or turning, because each of the abrasive particles acts like a minature cutting tool. However, unlike conventional machining the grains are much smaller than a cutting tool, and the geometry and orientation of individual grains are not well defined. As a result, abrasive machining is less power efficient and generates more heat.
Abrasive Machining Processes
Abrasive machining processes can be divided into two categories based on how the grains are applied to the workpiece.
In bonded abrasive processes, the particles are held together within a matrix, and their combined shape determines the geometry of the finished workpiece. For example, in grinding the particles are bonded together in a wheel. As the grinding wheel is fed into the part, its shape is transferred onto the workpiece.
In loose abrasive processes, there's no structure connecting the grains. They may be applied without lubrication as dry powder, or they may be mixed with a lubricant to form a slurry. Since the grains can move independently, they must be forced into the workpiece with another object like a polishing cloth or a lapping plate.
Common abrasive processes are listed below.
Bonded Abrasive Processes
Loose Abrasive Processes
Polishing
Lapping
Abrasive Flow Machining (AFM)
Water-jet cutting
Abrasive blasting
Mass finishing, tumbling
- Open barrel tumbling
- Vibratory bowl tumbling
- Centrifugal disc tumbling
- Centrifugal barrel tumbling
Abrasives
The most important property of an abrasive is its hardness. For abrasive grains to effectively cut, they must be significantly harder than the workpiece material. They can be grouped based on their hardness into two categories: conventional abrasives and superabrasives.
Conventional abrasive materials have been used by man since the advent of machining. They are made of materials that exist naturally on Earth, and they're abundant and cheap. Conventional abrasives can suitably machine most materials.
Superabrasives are much harder than conventional abrasives. Since they're much more expensive, they're the used when conventional abrasives won't suffice.
Common abrasives are listed below.
Conventional
Aluminum oxide (Corundum)
Silicon carbide
Emery
Pumice
Sand
Superabrasives
Diamond
Cubic Boron Nitride (CBN), Borazon
Further Information
Get more info on 'Abrasive Machining'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://abrasive_machining.totallyexplained.com">Abrasive machining Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
